Chemicals :: SolventsAcids & Bases :: UP DI WaterPlating Solutions :: Process WaterEtch Baths :: Point of Use Filtration(Final Filtration Applications) |
|
 |
Developed for the Special Needs of the Electonics IndustryPolyethersulfone Membrane Media Filter Cartridges |
EPS cartridges are designed to meet the special needs of the electronics and high purity chemical industries. Polyethersulfone membrane cartridges are resistant to most acids and bases and capable of handling strong sanitization agents. High flow rate make Polyethersulfone a good choice for central DI water systems. This membrane will also handle elevated process temperatures in compatible fluids. To minimize extractables, each cartridge module is pulse, power flushed until the rinse effluent reaches 17+ Megohm-cm and less than 3 ppb TOC. Each cartridge module is also individually tested.
|
Pore Size |
Air Diffusion Rate |
|
0.03 μm |
< 30 cc/min at 60 psi (4137 mbar) |
|
0.10 μm |
< 30 cc/min at 48 psi (3307 mbar) |
|
0.22 μm |
< 30 cc/min at 35 psi (2412 mbar) |
|
0.45 μm |
< 30 cc/min at 20 psi (1378 mbar) |
|
0.65 μm |
< 30 cc/min at 15 psi (1044 mbar) |
|
0.80 μm |
< 30 cc/min at 12 psi (827 mbar) |
|
1.0 μm |
< 30 cc/min at 8 psi (552 mbar) |
|
1.2 μm |
< 30 cc/min at 7 psi (483 mbar) |
-
If you are not sure what type of cartridges your process requires and need some expert advice.
-
If you know your cartridge specs and would like a quote from us.
