Cosmetics :: ChemicalsProcess Water :: DI WaterInks & Dyes :: Acids & BasesSoft Drinks :: Bottled Water(Final Filtration Applications) |
 |
|
|
Polyethersulfone Membrane MediaFilter CartridgesGPS Grade |
GPS general grade Polyethersulfone cartridges are designed for general purpose use wherever a cost effective membrane filter is required. Designed to hold the maximum amount of filter media that can be completely and effectively utilized in a cartridge, GPS filters lower the cost of filtration . GPS cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. These cartridge modules are also individually tested. Priced below special purpose cartridges, GPS cartridges are still manufactured with the same careful attention to both quality and performance.
Integrity Test Specifications (per 10 inch length)
|
Pore Size |
Air Diffusion Rate |
|
0.03 μm |
≤ 55 cc/min at 60 psi (4137 mbar) |
|
0.10 μm |
≤ 55 cc/min at 48 psi (3307 mbar) |
|
0.22 μm |
≤ 55 cc/min at 35 psi (2412 mbar) |
|
0.45 μm |
≤ 55 cc/min at 20 psi (1378 mbar) |
|
0.65 μm |
≤ 55 cc/min at 15 psi (1044 mbar) |
|
0.80 μm |
≤ 55 cc/min at 12 psi (827 mbar) |
|
1.0 μm |
≤ 55 cc/min at 8 psi (552 mbar) |
|
1.2 μm |
≤ 55 cc/min at 7 psi (483 mbar) |
-
If you are not sure what type of cartridges your process requires and need some expert advice.
-
If you know your cartridge specs and would like a quote from us.
For more information please email us or call directly.
