Corrosion Control Water Filter for Plumbing, Tanks and Pipes
Item Number: KW4520-Twin-Sediment-Corrosion
Estimated Arrival: Between Oct 02 and Oct 08. * ETA for USA only
Always FREE Shipping!
Whole House Water Filtration System, Corrosion Control for Plumbing, Tanks, Pipes and Water Systems
- Prevents and protects plumbing, tanks, pipes and water systems with corrosion control inhibitor filters.
- Provides control corrosion caused by acidic ph. Sediment entrapment down to 5 microns
- Transparent filter housings made in Italy of safe polyethylene
- Includes 2 filter housings, wrench, 2 zinc coated steel mounting brackets, 1 sediment and 1 pH corrosion control cartridge
- Protects the hot water system and appliances from corrosion and scale accumulation
The KleenWater sediment and corrosion control water filtration system is specifically designed for residential and light commercial applications that have water with low pH levels. The pH scale uses a range from 0 to 14, with 7.0 indicating neutrality. Numbers beginning at 7.0 and moving toward 0 indicate acidity, while the numbers beginning at 7.0 and moving toward 14 indicate alkalinity, so the scale divides acids from bases. Water below 7 are corrosive to copper plumbing, plumbing fixtures and hot water systems. The first stage of our dual filter system uses our KW4520G dirt, rust and sediment filter cartridge. This 5 micron filter cartridge features ends caps and gaskets which facilitate a positive seal and superior filtration. The transparent housing allows visual inspection of cartridge condition. It recommended this filter cartridge be replaced every 8 -12 months.
Second in series is our KW4520-CorrCon. This filter contains magnesium oxide and calcium carbonate alkaline media to boast pH from acidic to neutral or even slightly alkaline. As the acidic water passes through the this stage of the filtration process a small amount alkaline filtration media is dissolved into the water thus bringing the pH toward neutral. Also this filter contains FDA approved Siliphos Spheres to sequester the alkaline hardness mineral that is often naturally occurring and that is added as a result of the neutralizing process . This contains an ideal combination of orthophosphates and polyphosphates. The orthophosphates react with the calcium bicarbonates in the water supply to form a thin, tight, non-corrosive, passivating film on pipe walls. This film is almost like a glass coating, separating the water from the metal plumbing/hot water system.
The polyphosphate ingredient sequesters hardness mineral content. Normally if there is significant calcium bicarbonate (soluble hardness) in the water supply it will revert to calcium carbonate (insoluble precipitate) when heated. Calcium carbonate is referred to as scale. This scale creates incredible inefficiency. 1/8" scale formation in a hot water system can increase energy demands 30-40%. Also scale will reduce water pressure by clogging pipes downstream.
The sequestration characteristics of the polyphosphate ingredient react with the hardness ions and prohibit them from precipitating to a solid as they otherwise would. The KW4520CorrCon filter should be changed every 4 - 6 months.
Search KW4520G(1)-KW4520CorrCon(2)-PWF357GR(1) to purchase replacement cartridges.
The Kleenwater 4.5 X 20 inch transparent polyethylene water filter housing is manufactured in Italy from the highest quality and safest materials. This filter is very rugged and boasts a 120 psi maximum working pressure. A built-in pressure relief vent and a spanner wrench are included for easy periodic cartridge change out. A drain port is another convenient feature which allows the water to be drained from the filter simplifying cartridge change. Two individual heavy duty zinc coated steel mounting brackets with screws are furnished to facilitate a professional installation.